Ahh! Thanksgiving is next week! If you are a little slow getting decorated for the holidays (like me) you will love this quick and easy “Give Thanks” thanksgiving banner!
What you will need:
- 1/4 a yard each of three coordinating fabrics patterns (I used the ones in this collection from The Ribbon Retreat)
- 3 to 5 yards of ribbon (I used this ribbon from The Ribbon Retreat)
- Hot glue gun and glue
- iron-on vinyl letters or cut out your own
- needle and thread
To get started I cut out 6 flag pendants in one of the fabric patterns.
Cut each one 8 inches long by 4 inches wide (you can mess around with the measurements, depending on how much fabric you have and how big or small you want the banner to be).
It was easier for me to create a pattern using paper and a ruler.
After the rectangles are cut, fold in half and cut out the bottom triangle, as shown in the pattern.
Take a different fabric and create one larger pendant flag for the “give” portion of the banner.
I made mine the 8 inches by 8 inches, fold in half, and then cut out the triangle on the bottom.
It should look like this (minus the words and ribbon):
I cut out the iron-on vinyl lettering to say “give” in one font and then “thanks” in another font.
I used a chocolate brown vinyl which worked well with the coordinating fabrics I chose.
On the six pendant flags, iron-on each flag a letter for the word “thanks.”
Be sure to iron the flag pendants in half so that they lay nice.
Iron on according to the instructions for the iron-on vinyl you are using.
I normally place another piece of fabric over the letter. It makes the ironing a lot easier.
Iron on the word “give” to the larger pendant flag, the same way as with the other letters.
While ironing get that hot glue gun fired up.
Cut a piece of ribbon to the desired length (I always do mine a little long, so that I can tie the ribbon on when hanging up the banner). Run a line of hot glue down the back side of the flag near the fold.
Place ribbon on top of the line of glue and press down.
On top of the ribbon put another line of glue and fold over the pendant, so that the fold is glued to the ribbon running through the pendant flag. Repeat with the “thanks” pendant flag on a another piece of ribbon a little longer than the other one.
While the glue is drying, create the cute little pinwheels out of the third coordinating fabric. I chose a gorgeous blue, yellow, and orange arrow print. Adorable. I am showing the tutorial with a chevron fabric, but isn’t what I used for this banner.
I love these easy ruffle pinwheels. Start with a three inches wide and about 12 to 15 inches long (vary the size to make larger and smaller flowers). Fold the strip in half. Sew a running stitch on the loose edges all the way to the end. Pull the thread tight and form into a pinwheel. Tie a knot at the middle of the circle.
I used a clothes pin to secure my pinwheels to the ribbon, but glue would work too.
I love how the colors are different than regular fall colors. I think adding the blue with touches of green really adds a new character to fall colors.
I used these baby clothes pins to hook on the pinwheels, but large ones would be cute too.
Even add clothes pins to the pendant flags for an extra special flair.
I think this will this banner will help remind me and my family to give thanks for all that we have this Thanksgiving season.
Thank you for creating with me today! I hope to see you soon over at The Benson Street.
I’m Emily, a mom and wife with a passion for crafting, celebrating holidays, and creating memorable moments. From Idaho to the world, The Benson Street is a treasure trove of easy, fun DIY projects, delightful printables, and delicious recipes. With over a decade of experience in blogging and a love for all things seasonal, I’m here to share my tips, ideas, and occasional mishaps. Join me in adding a dash of joy and creativity to every day! Read more…